Fanpage Facebook
Danh mục sản phẩm
HÃNG TAISITE - MỸ
Sản phẩm nổi bật
Hổ trợ trực tuyến
Mr.Đăng - 0903 07 1102
Tư vấn viên - 0983 23 8192
Thống kê
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
MÁY ĐO THỂ TÍCH KHÍ CO2 MODEL: SS-60
MODEL: SS-60
ZAHM & NAGEL - Mỹ
12 Tháng
MÁY ĐO THỂ TÍCH KHÍ CO2
Model: SS-60
Hãng SX: ZAHM & NAGEL
Xuất xứ: Mỹ
Hàng có sẵn
MÁY ĐO THỂ TÍCH KHÍ CO2
Model: SS-60
Hãng SX: ZAHM & NAGEL
Xuất xứ: Mỹ
The Zahm SS-60 Volume Meter was developed to determine average CO2 levels of gas in tank stored beverages. Its improved design over the older Zahm-Hartung Volume Meter (Series 2000) greatly improves accuracy and time required to run a test. A precise piston release mechanism eliminates bleeding off of the sample and the potential for human error. Samples undergo repeatable, precise volumetric expansion test after test for more accurate measurements. The lightweight design reduces operator fatigue while the stainless steel construction increases strength and resists corrosion. The thermometer may also be replaced in the field without the need to return it to the factory for replacement. The parts list and line drawing should be used when ordering replacement parts or operating the instrument.
| 1000 | SS-60 Volume Meter | 1017 | Thermometer Guard Screw (2 ea.) |
1040 |
Vent Cock Swivel |
| 1001 | Body | 1018 | Thermometer Cushion Ring (2 ea.) | 1042 | Aspirator Bulb |
| 1002 | Base | 1019 | Thermometer Seal Ring (2 ea.) | 1042-A | Aspirator Bulb "O" Ring |
| 1003 | Base Shield | 1020-B | Valve (2 ea.) | 1045 | Gooseneck |
| 1004-A | Neck Shield | 1021 | Clamping Device Assembly | 1048 | Clamp Handle Assembly |
| 1005 | Piston | 1022 | Clamping Device Body | 1048-1 | Front Brace |
| 1006 | Piston Body | 1023 | Clamping Device Yoke | 1048-2 | Milled Brace |
| 1007 | Piston Handle | 1024 | Clamping Device Screw | 1048-3 | Rear Brace (2 ea.) |
| 1008 | Piston Lock Pin | 1025 | Clamping Device Gasket | 1048-4 | Screw - Left Side (2 ea.) |
| 1009 | Piston "O" Ring | 1029 | Pressure Guage | 1048-4A | Screw - Right Side (2 ea.) |
| 1010 | Piston Body Gasket | 1036 | Sight Glass | 1048-5 | Lock Washer (6 ea.) |
| 1011 | Base Screw (6 ea.) | 1037 | Sight Glass Cage | 1048-6 | Cap Nut (4 ea.) |
| 1012 | Thermometer | 1038-A | Sight Glas Gasket (Top) | 1048-7 | Handle w/Rubber Sleeve (2 ea.) |
| 1016 | Thermometer Guard | 1038-B | Sight Glass Gasket (Bottom) |
Bình luận
Sản phẩm cùng loại
MÁY ĐO HÀM LƯỢNG KHÍ MODEL:SERIES 5000
Hàng có sẵn
MÁY ĐO KHÍ CO2 TINH KHIẾT MODEL SERIES 10000
Hàng có sẵn
